plastic signs, nameplates and advertising light boxes.
Surfaces of plastics such as PS, ABS, PMMA, PC and AS.
No corrosion to the substrate (Figure)
Heat Resistance (Figure)
Vacuum forming can be done (Figure)
Environmental-friendly and Aromatic (Figure)
a.·Before use, stir the printing ink to prevent the special effect auxiliary added in the printing ink from segregating;
b.·Remove the oil stain and dust on the surface of substrate before printing;
c.·Reasonably select fast, medium or slow thinner to make adjustments as required by the actual working environment;
d.·To achieve excellent printing effects of fine lines, patterns and text, please select 77-150 lines/cm halftone and our OMG-111 slow-curing paste may be added to better avoid diffusion, burrs and blurring of printing ink.
a.·Trial printing must be done before printing to avoid inconsistent quality caused by different substrate types;
b.·Where poor adhesion or printing process occurs after printing, please check whether it is due to the movement of plasticizer or other additives in the substrate to the surface or due to the static electricity, it is recommended to clean with alcohol or n-hexane;
c.·The amount of thinner can be adjusted as required to meet different requirements for screen mesh, ambient conditions, printing results and ink viscosity.
a.Please completely seal the ink container and keep it at a cool and ventilated place, avoid exposure to open flame or heat;
b.Please store it at temperatures of 5℃-25℃ to avoid exposure to glare or strong acid/alkali.
The shelf life of this series of products is 1 year since the production date, their usability shall be reconfirmed if the shelf life expires.
The test data above represents our test results under certain test conditions and not listed as guaranteed values. Please conduct tests in use according to actual situation and begin mass production only after it is confirmed that the customer's requirements can be met.