Waterproofing for water pool
2018-01-30
Waterproof layer(Optional material)
•Thick waterproof mortar in 10mm (General pool)
•Thick water-based epoxy anticorrosive waterproof mortar in 10mm (pool with corrosion requirements)
•Polymer cement compound and polypropylene fiber coil waterproof system in 1.2mm. (stick tiles to the plastering pool directly)
•Thick IJFS222 waterproof mortar in 2 mm. (water pool with cement protection layer)
Leveling layer:
The proportion of cement and mortar is 1:2 with the thickness of 20mm
Sloping layer:
LC5.0 light aggregate concrete, the thickness of the thinnest place is 30mm
Structure layer:
Casted steel concrete (smooth and press the protoplasmic surface)
Attention:
1.waterproof mortar: waterproof emulsion: cement: fine Sand=1:3:2:4(weight ratio)
2.waterproof mortar: waterproof emulsion: cement=1: 0.8(weight ratio)
Recommended product: IJFS909
Accessories product: IJFS502 leaking stoppage IJFS120 self-repairing waterproof paint
Application instruction:
Apply for two times, the thickness should be 0.5mm for each time
Key points:
Apply evenly without missing; thickness should reach 1mm